Loading... Please wait...


  • Kit Contents
0.60 LBS

Product Description

Hardware Features

    • Supports Texas Instruments Digital Signal Processors and Microcontrollers with JTAG interface:
  • F24xx
  • C54xx
  • C67xx
  • C62xx
  • C642x
  • C64x+
  • C674x
  • DaVinci™
  • TMS470
  • OMAP™
  • F28xx
  • C55xx
  • C672x
  • C641x
  • C645x
  • DM64x
  • DM355
  • TMS570
  • Cortex™
  • Operates off PC/laptop USB port, no internal adapter required
  • USB bus powered, no power supply required
  • Supports USB 1.x and USB 2.0 (full speed)
  • Advanced emulation controller provides high performance
  • Compatible with +3.3V or +5V processors
  • One LED provides operational status
  • 14-pin JTAG Interface

System Features

  • Voltage isolation provided by IL715, IL717, HCPL-260L (UL1577 rated for 2500Vrms for 1 minute and IEC 61010-1, Pollution Degree II, Material Group III, Max Working Voltage 300 Vrms Common Mode Transient Immunity 30Kv/us @ Vcm=300V)
  • Voltage isolation on PWB with 6mm minimum clearances and creepage distances

Software Features

  • Compatible with the Full License of Code Composer Studio™ versions 3.x and later from Texas Instruments
    (Not compatible with the DSK/eZdsp/EVM Tools versions of Code Composer Studio™)
  • Supports Spectrum Digital's "SDFlash" Programming Utility
  • Supports Spectrum Digital's "SDConfig" Utility designed for emulator to target verification
  • Compatible with Windows 2000, XP, Vista, Win7, Win10 and Linux Operating Systems

What's Included

  • XDS510 USB Galvanic JTAG Emulator
  • USB cable
  • CD-ROM with drivers
  • Setup instructions
  • Warranty registration card
  • Technical reference manual

You May Need

  • 4 Channel JTAG Expander
  • DSP Target Board (EVM, eZdsp, DSK)

Installation Guide
Drivers and Support

Debug hardware
Debug software
Flash programming



Warranty Information

30 Day Warranty

Find Similar Products by Category

You Recently Viewed...